Icons

Tip: When a function is active in infra-CONVERT the corresponding icon is highlighted in grey. Example:
Inactive: Select inactive Active: Select active

Click on an icon for more information about its function:
Open Save quality control plan Show feature table Define general tolerances Define drawing frame Select Select area Select all features Add feature Reposition stamps Reposition and rotate stamps Rotate stamps Adjust stamp size Multiple stamps per feature Select stamps Select stamps (area selection) Remove stamp selection Delete feature Zoom in Zoom out Select area Autozoom Pan Permit all elements (block mode) Permit dimensions Permit text elements Only special features Define the feature types Set feature type

Open

OpenThis icon opens the dialogue window for opening a drawing.
For more information see ⇒ Functions: Open drawing, Supported drawing formats

Save quality control plan

Save quality control planThis icon opens the dialogue window for saving a quality control plan.
For more information see ⇒ Functions: Save quality control plan, Supported quality control plan formats

Show feature table

Merkmalstabelle anzeigenThis icon displays the Feature table window.
For more information on the Feature table see ⇒ Feature table

Define general tolerances

Define general tolerances This icon displays the “Tolerance table option”.
For more information on the Tolerance table see ⇒ Functions: Define general tolerances

Define drawing frame

Define drawing frameThis icon opens the dialogue for defining a drawing frame.
For more information on the drawing frames see ⇒ Functions: Define drawing frame

Select

SelectIf this icon is active then dimensions can be selected and features set using the left mouse button.
For more information on Select see ⇒ Functions: Select

Select area

Select area This icon is used to select multiple dimensions to set features.
For more information on Select see: ⇒ Functions: Select area

Select all features

Select all features This icon adds all the dimensions to a drawing feature.
For more information on Select see: ⇒ Functions: Search all features

Add feature

Add featureThis icon adds a feature to your drawing.
For more information on Features: Siehe ⇒ Functions: Add feature

Add attributive feature

This icon was removed with version 11.9.0.

This icon adds an attributive feature in your drawing.
For more information see ⇒ Functions: Add attributive feature

Reposition stamps

Reposition stampsThis icon is used to move stamps.
For more information about repositioning stamps see ⇒ Functions: Reposition stamps

Reposition and rotate stamps

Reposition and rotate stampsThis icon is used to move and orientate stamps.
For more information about repositioning and rotating stamps see ⇒ Functions: Reposition and rotate stamps

Rotate stamps

Orientate stampThis icon is used to orientate stamps.
For more information about rotating stamps see: ⇒ Functions: Rotate stamps

Adjust stamp size

Adjust stamp sizeThis icon is used to adjust the size of stamps.
Tip: This function is only available if working with pdf or graphics files, and is deactivate when processing CAD drawings.
For more information on adjusting the size of stamps see: ⇒ Functions: Adjust stamp size

Multiple stamps per feature

Multiple stamps per featureThis icon is used to assign multiple stamps to a feature, for example to assign stamps to undimensioned features in symmetrical drawings.
For more information on Features see ⇒ Functions: Multiple stamps per feature

Select stamps

 Select stamps This icon is used to select one or more stamps.
For more information on Stamps see: ⇒ Functions: Select stamps

Select stamps (area selection)

 Select stamps (area selection)This icon is used to select multiple stamps in an area.
For more information on Stamps see: ⇒ Select stamps (area selection)

Remove stamp selection

 De-select stamps This icon is used to de-select stamps.
For more information on Stamps see ⇒ Remove stamp selection

Delete feature

 Delete feature This icon is used to delete all features subsequently clicked on with the left mouse button.
For more information on Features see ⇒ Functions: Delete feature

Zoom in

Zoom inThis icon is used to zoom in (enlarge) the drawing area displayed in a single step.
For more information see ⇒ Control: Zoom in

Zoom out

 Zoom out This icon is used to zoom out (reduce the size) of the drawing area displayed in a single step.
For more information see ⇒ Control: Zoom out

Select area

Select areaThis icon is used to select the area display.
For more information see ⇒ Control: Select area

Autozoom

Fit to windowThis icon fits the entire drawing to the window.
For more information see ⇒ Control: Autozoom

Pan

MoveThis icon is used to move the drawing in the window.
For more information see ⇒ Control: Move

Permit all elements (block mode)

All elements (block mode)Filter option: If this icon is active, elements inserted as a block in a CAD drawing can be stamped.

Permit dimensions

DimensionFilter option: if this icon is active, then elements labelled as dimensions in a CAD drawing can be stamped.

Permit text elements

Text elementsFilter option: If this icon is active then elements labelled as text in a CAD drawing can be stamped.

Only special features

Only special featuresFilter option: If this icon is active then only elements labelled as special features in a CAD drawing will be stamped.

Define the feature types

Define the feature types This icons opens the Featuretypes dialog box.
For more information see ⇒ Functions: Define feature types

Set feature type

Set feature type This icon assigns the current feature type to the selected feature.
For more information see ⇒ Function: Set feature type